Taulia experience center

Article Number: 000010690

This guide is for administrators responsible for installing and setting up SAP ERP with the Taulia add-on for the SAP integration suite, and managed gateway.
To integrate SAP ERP with Taulia via the SAP integration suite, and managed gateway, administrators must first download and install the required components for the Taulia add-on for SAP ERP.

This guide applies to:

• Taulia

Overview of integrating SAP ERP with Taulia using the SAP integration suite managed gateway
For users to integrate SAP ERP with Taulia using the SAP integration suite, and managed gateway, the installation of the following components is required:
Taulia add-on for SAP integration suite managed gateway: The add-on is installed on the SAP ERP system. The add-on enables SAP ERP to communicate with the Taulia platform through the SAP integration suite, managed gateway.
SAP Cloud Platform cloud connector (cloud connector): The cloud connector allows you to efficiently
and securely transfer data between the SAP integration suite, managed gateway, and SAP ERP. The
cloud connector is a software component to connect to cloud applications. For more details on
the cloud connector, see HERE. 
The following table lists the steps that you must perform to integrate SAP ERP with Taulia using the SAP integration suite, and managed gateway:

Supported systems
This section lists the supported systems and the supported software in this release of the Taulia add-on for SAP Integration Suite, managed gateway.
SAP Integration Suite, a managed gateway supports only Unicode systems. Currently, the supported encoding for data is UTF-8.
The Taulia add-on for SAP Integration Suite managed gateway supports the following versions of SAP ERP:
1 - SAP ERP (SAP_BASIS 700 SP27 is the SAP Basis version for all the following SAP ERP versions)

• SAP EHP0 for SAP ERP 6.0 (SAP_APPL 600 SP22)
• SAP EHP2 for SAP ERP 6.0 (SAP_APPL 602 SP12)
• SAP EHP3 for SAP ERP 6.0 (SAP_APPL 603 SP11)
• SAP EHP4 for SAP ERP 6.0 (SAP_APPL 604 SP12)
• SAP EHP5 for SAP ERP 6.0 (SAP_APPL 605 SP09)
• SAP EHP6 for SAP ERP 6.0 with non-HANA database (SAP_APPL 606 SP05)
• SAP EHP6 for SAP ERP 6.0 with HANA database (SAP_APPL 606 Minimum supported version)
• SAP EHP7 for SAP ERP 6.0 (SAP_APPL 617 Minimum supported version)
• SAP EHP8 for SAP ERP 6.0 (SAP_APPL 618 Minimum supported version)

2 - SAP S/4HANA

• SAP S/4HANA, on-premise edition 1909
• SAP S/4HANA, on-premise edition 1809
• SAP S/4HANA, on-premise edition 1709
• SAP S/4HANA, on-premise edition 1610
• SAP S/4HANA, on-premise edition 2020
• SAP S/4HANA, on-premise edition 2021
• SAP S/4HANA, on-premise edition 2022

Transport Layer Security
SAP Integration Suite, managed gateway requires the minimum Transport Layer Security version, TLS 1.2.

Software components
Install the appropriate software component for your SAP ERP or SAP S/4HANA system:

SAP ERP
Taulia add-on for SAP Integration Suite managed gateway for SAP ERP version 1.0

• TAUCI1 100

Before you install the Taulia add-on for SAP Integration Suite, managed gateway for SAP ERP version 1.0 (TAUCI1 100) software component, you must install the following software packages (if not already installed on the system):

• ARBCI1 100

SAP S/4HANA
Taulia add-on for SAP Integration Suite managed gateway for SAP S/4HANA

• TAUCI1 10S

Before you install the Taulia add-on for SAP Integration Suite, managed gateway for SAP S/4HANA version 1.0 (TAUCI1 10S) software component, you must install the following software packages (if not already installed on the system):

• ARBCI1 10S

Supported languages
The add-ons for SAP ERP and SAP S/4HANA systems are available only in English.

Downloading and Installing the Taulia add-on for the SAP integration suite, managed gateway
You can download the Taulia add-on for the SAP integration suite, managed gateway from the SAP Software Download Center, or the Maintenance Planner. Go to the SAP ONE Support Launchpad at https://launchpad.support.sap.com 
See the SAP Note 1841471 for general instructions about how to install the add-on. 
The Taulia add-on for the SAP integration suite managed gateway requires the Ariba add-on component ARBCI1 to be installed. This dependency must be fulfilled for the Taulia add-on to work properly.

Post-installation tasks
After you have completed installing the add-on for SAP Integration Suite, managed gateway, ensure that you do the following:

• Define the authorizations for the Taulia solutions you require. For more information, see Defining authorizations.
• Ensure that you maintain the required parameters for each of the Taulia solutions you use with SAP.
• Integration Suite managed gateway. In the transaction code, SPRO, go to the node → Integration with Other SAP Components → SAP Taulia Cloud Integration Gateway and configure the parameters. For more details, consult the Taulia add-on for the SAP integration suite, managed gateway: configuration guide.
• Execute the setup interface program to configure the required integrations between SAP ERP and Taulia via the SAP integration suite, managed gateway. For more details, consult the Taulia add-on for the SAP integration suite, managed gateway: configuration guide.
• Create the required variants for the data extraction jobs and schedule the required jobs on the system. For more details, consult the Taulia add-on for SAP integration suite, managed gateway: configuration guide.

Uninstalling the add-on
See the SAP Note 2011192 for instructions about how to uninstall the add-on.

Defining authorizations
After you install the Taulia add-on component, you must define the required authorization for users. The authorizations allow the configured users to send and receive information for transactions to Taulia. To define the required authorizations, use the authorization objects, class, and program that Taulia provides. You must use the following out-of-the-box authorization objects for SAP ERP users.
Taulia provides the following authorization objects and classes:
ACIS: Authorization object class

Configuring the SAP Cloud Connector
Connect SAP Integration Suite, managed gateway with your SAP ERP using SAP Cloud Connector.
The Cloud Connector serves as the link between the SAP Cloud Platform and existing on-premise systems; it runs as an on-premise agent in a secured network and acts as a reverse invoke proxy between the on premise network and SAP Cloud Platform. Due to its reverse invoke proxy support, you don't need to configure the on-premise firewall to allow external access from the cloud to internal systems.

New installation and configuration
You must install and configure cloud connector for test and production environments. For information on how to install and configure cloud connector, see Cloud Connector. Add the new subaccounts and configure the cloud connector to connect to SAP ERP.
For high availability, you must configure multiple subaccounts
When creating subaccounts for cloud connector, enter the following information:

Prerequisite
Use Java version 1.8 or above (JAVA SE 8 or above) for the cloud connector component.

Steps to configure
Perform the following tasks for each subaccount associated with the data center that you are connected to:
1 - Log on to the cloud connector.
2 - Choose a New Subaccount.
3 - Enter the subaccount details. Refer to the table above for subaccount information
4 - Enter the following information:

• Subaccount User: Enter the P user ID and password that you received in the email when SAP Integration Suite, managed gateway was enabled on the SAP Ariba solution.
• Display Name: (Optional) Enter a name to easily recognize the subaccount in the user interface.
• Location ID: (Optional) Enter the same LocationID that you had previously configured in SAP Integration Suite, managed gateway. If you are a new customer, define an ID to identify the location of this cloud connector for the subaccounts. The location ID must be unique per subaccount and should be an identifier that can be used in a URL.
• Description: (Optional) Enter a brief description of the connection.

5 - Click Save.

After configuring the subaccounts, you must configure the cloud connector to allow SAP Integration Suite, a managed gateway, to access SAP ERP or SAP S/4HANA. Configure the backend systems in the cloud connector access control management. For more information, see Configure Access Control in the SAP BTP Connectivity guide.
If you want to configure a cloud connector for multiple ERP systems, you must configure multiple connections on the Cloud To On-Premise page.

Configuring existing installation of Cloud Connector
If you already have an installation of a cloud connector, you can configure it to connect to your SAP ERP. You must ensure that you are using Java version 1.8 or above (JAVA SE 8 or above). Add the new subaccounts and configure the cloud connector to connect to SAP ERP. For more information, see the Cloud Connector section in the SAP BTP Connectivity guide.